Emergency timer

Simple emergency testing solution
Image module

DIN rail enclosure

Image module

DIN rail



The Emergency timer also provides additional features such as prolong, where the devices can remain in emergency mode for an extended time allowing a cool-down period for HID lights time to relight.
Image module
Image module

Key input

The device also has a key input which is used to start and stop emergency tests by triggering the relay/contactor (AS 2293.1:2005 Clause 4.3.1). The duration of the emergency discharge test can also be selected for 90 or 120 minutes and allows extra time (45 minutes) to check devices are in emergency mode after the test.

Self-contained assembly

The Emergency timer and Test Switch is a manual emergency test facility, which includes a 4-pole contactor, and can service up to 4 lighting circuits per unit.
Image module

Two Value Product Lines

Choosing the correct line is essential to ensure the requirements of your application are met

Reliability and Quality in a standard form factor
  • Contactor supplied
  • DIN rail box
  • Prolong time to allow inspection
  • Low power consumption
  • Fully compliant


Class Leading, highest reliability and lowest power options
  • DIN rail mounting
  • Prolong time to allow inspection
  • Circuit monitoring switch over multiple circuits
  • Link multiple units together
  • Lowest power consumption
  • Fully compliant

(Full Featured)

Find your local distributor

lets go